• B/304, Suresh Park, Pokhran Rd. No. 1, Thane (W) - 400601

Bursting Strength Tester

Bursting Strength Tester 7 inch Colour Touch Screen Model

Bursting Strength Tester : Mcsparr bursting strength tester is suitable for testing burst strength of the paper, paper boards, corrugated sheet / boxes, industrial fabrics, fabrics, rexine and leather, etc.

Available types of Bursting Btrength Tester
Paper Tester : Fitted with thin rubber diaphragm to accurately test the burst value of paper and thin foils, which is have lower burst value (capacity 0 to 7kg/cm2 and 14kg/cm2)

Board Tester : Fitted with thick rubber diaphragm to test higher burst value products like corrugated board,f abric cloth and paper board (capacity 0 to 35 kg/cm2/ 50kg/cm2 and 70kg/cm2)

Suitable for testing as per following standards

  • IS 1060 (part i) 1966
  • 1397-1967 (kraft paper)
  • 13228-1991 (corrugated board)
  • 1966-1975 (fabric)
  • 2711(part i)-1977(corrugated box)


  • Tappi t403 om-91 (paper)
  • T807 (paper board and liner board)
  • T810 om-92 (corrugated and solid fibreboard)
  • Astm d774 / d774m-96a (paper)
  • Fcbm 3:90

Bursting Strength Tester - Digital Eco

Bursting Strength Board Tester - Fully Auto Touch Screen with Test Report of Graph & Data

Bursting Strength Board Tester - Fully Auto Touch Screen with Test Report of Graph & Data

Bursting Strength Paper Tester - Fully Auto Touch Screen


  • 7 inch Colour Touch Screen
  • Test reports with Graph and Data
  • Test Result peak-hold facility
  • Auto tare set function
  • Alphanumerical Keypad for Data entry
  • Built in Real Time Clock
  • 2 USB Port
  • 1 USB Port for PC Keypad interface
  • 1 USB Port for Pen Drive interface
  • 8GB Data Storage for Samples Test
  • RS-232 Port for Online PC software interface or Serial printer interface
  • 21CFR Programmed in PC Model
  • Buzzer for Rejection indication
  • 50 User Name selectable Programs
  • External Relay card with SMPS & LED indication
  • Programmable Batch size up to 30 samples
  • Online Display of Average, Max reading of samples tested


  • Report saving with date & time stamp
  • Data view as per date & batch number
  • Automatic batch number according to date & time
  • Same data can be copied on to pen drive
  • The copied data from pen drive can be viewed on PC in EXCEL software directly
  • Software calibration of Pressure Transducer
  • High Speed ADC interface
  • Test Unit selectable Kg/Cm2, PSI and KPA
  • Unit Least count 0.1 in PSI / 0.01in Kg/Cm2
  • Pressure Transducer Over load Protection
  • Separate Panel for Solenoid Valve operation
  • Mode of Test –Paper/Board /Textile/Other Selection
  • Separate Panel Switch for Test Start operation
  • Automatic Burst Factor Calculation in the Paper Tester

Bursting Strength Tester