Box Compression Strength Tester
Box Compression Strength Tester 7 inch Colour Touch Screen Model
Box compression strength tester is used for measure the containers resistance to the external compression loads during transit and storage period, this is suitable for test stacking strength of corrugated boxes and other type of containers
Suitable to test following standards
- IS:7028 (PART VI)1973 and
IS:7028 (PART IX)1975 - ASTM D4577-94 / D 642-98
- FCBM 14:96
- TAPPI:T804 om-02
- FEFCO:TM 50 1997
Box Compression Strength Tester
Capacity Available
- 1000kgf, 2000kgf and 5000kgf
- Standard Size 1M X 1M X 1M
- Other Sizes 600mm X 600mm X 600mm, 1.5M X 1.5M X 1.5 M & on request any size will be available
Features
- Test reports with Graph and Data
- Test Result peak-hold facility
- Auto tare set function7 inch Colour LCD
- Alphanumerical Keypad for Data entry
- Built in Real Time Clock
- 2 USB Port
- 1 USB Port for PC Keypad interface
- 1 USB Port for Pen Drive interface
- 8GB Data Storage for Samples Test
- RS-232 Port for Online PC software interface or Serial printer interface
- 21CFR Programmed in PC Model
- Buzzer for Rejection indication
- 50 User Name selectable Programs
- External Relay card with SMPS & LED indication
- Programmable Batch size up to 30 samples
- Online Display of Average, Max reading of samples tested
- Report saving with date & time stamp
- Data view as per date & batch number
- Automatic batch number according to date & time
- Same data can be copied on to pen drive
- The copied data from pen drive can be viewed on PC in EXCEL software directly
- High Speed ADC interface
- Software calibration of Load Cell
- Test Unit selectable Kgf
- Unit Least count 0.1in Kgf
- Load Cell Over load Protection
- Mode of Test- Pre Load, Pre Length and Instant
- Separate panel Switch for Test Start operation
- Fast speed mode for approach & retreat
- Once test is over automatically the upper platen moves up with 40mm per Min speed and stop its as per the last tested Box height